We use cookies to provide you with a better experience. By continuing to browse the site you are agreeing to our use of cookies in accordance with our Cookie Policy.
SIGLENT Technologies has introduced a new flagship oscilloscope, the SIGLENT SDS5000X. Available with bandwidths of 350, 500, and 1 GHz, and featuring a maximum sample rate of 5 GS/s.
Teledyne LeCroy announces support for PCI Express 5.0 physical layer testing with an advantage in calibration and test completion time with QPHY-PCIE5-TX-RX physical-layer software option for LabMaster 10Zi-A series oscilloscopes.
Signal Microwave and GigaProbes have developed a line of 40 and 70 GHz test boards. Created as a demonstration tool, they are also used for validating VNA calibration and operation. This helps ensure accurate measurements to 40 or 70 Ghz and they are compatible with all VNA manufactures.
Highest performance Field Replaceable Connectors on the market. These field replaceable connectors have a 2.92 mm interface and a rear socket to accept a 12 mil (.012 inch) pin. Standard 2 and 4 hole flange sizes available. The 2.92 mm interface operates mode free through 40 GHz.
These connectors can be mounted anywhere on the board, not just the edge. Utilizes a vertical launch transition to the board with a screw-on mounting compression fit. The interface is 2.92 mm and operates mode free through 40 GHz. The compression fit does not require soldering for consistent Signal Integrity performance.
These 1.00 mm Edge Launch Connectors are designed to optimize connector to board transitions. The 1.00 mm interface is mode free through 110 GHz. Test boards with microstrip and GCPWG are available to verify product performance. These boards are made with an FR-4 stiffener and only the top ground of the board is used for the board transition.
These 1.85 mm Edge Launch Connectors are designed to optimize connector to board transitions. The 1.85 mm interface is mode free through 70 GHz. Test boards with microstrip and GCPWG are available to verify product performance. These boards are made with an FR-4 stiffener and only the top ground of the board is used for the board transition.
These 2.92 mm Edge Launch Connectors are designed to optimize connector to board transitions. The 2.92mm interface is mode free through 40 GHz. Test boards with microstrip and GCPWG are available to verify product performance. These boards are made with an FR-4 stiffener and only the top ground of the board is used for the board transition.
HyperLynx® Analog, delivers truly scalable analog circuit simulation, allowing PCB designers to precisely control simulation parameters and environment.