Items Tagged with 'Control Loop'

This extreme measurement seems more impossible than difficult.  The traditional stability assessment method for voltage regulators is the Bode plot.  Access to the control loop is required and a small signal is injected into the control loop, usually via a resistor, placed at the top of the voltage sense divider. Without access to this voltage divider, there isn’t a place to inject a signal into the control loop, and therefore the Bode plot is seemingly impossible…

VRMs and VRM controllers are often selected based on size, efficiency, price, or a relationship with the manufacturer. This often leads to a poor VRM selection, requiring additional engineering resources, greater time to market, as well as, higher BOM costs to correct the deficiencies. In this article, we evaluate the choices, define some useful figures of merit, and provide specific selection suggestions.